
Add to Cart
Miray’s SFP Transceivers are a high performance, cost effective module which have a single LC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1490 nm DFB laser, up to 22dB link budge ensure this module 1000Base-ZX Ethernet 80km application.
The WDM Bi-Directional small form-factor pluggable (BiDi SFP) is a compact optical transceiver module which is used in optical communications for both telecommunication and data bidirectional communications applications. It interfaces a network device mother board (for a switch, router or similar device) to a fiber optic or unshielded twisted pair networking cable. It is a popular industry format supported by several fiber optic component vendors.
Operating Case Temperature: Standard : 0 to +70°C
Internal Calibration or External Calibration
Parameter | Symbol | Min. | Typical | Max. | Unit | |
Case operating Temperature | Industrial | TC | -40 |
| 85 | °C |
Extended | -5 |
| 85 | °C | ||
Commercial | 0 |
| +70 | °C | ||
Supply Voltage | VCC | 3.135 |
| 3.465 | V | |
Supply Current | Icc |
|
| 300 | mA | |
Inrush Current | Isurge |
|
| Icc+30 | mA | |
Maximum Power | Pmax |
|
| 1 | W |
Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
Transmitter Section: | ||||||
Center Wavelength | λc | 1470 | 1490 | 1510 | nm | |
Spectral Width | σ | 1 | nm | |||
Sidemode Supression ratio | SSRmin | 30 | dB | |||
Optical Output Power | Pout | -2 | +3 | dBm | 1 | |
Extinction Ratio | ER | 9 | dB | |||
Optical Rise/Fall Time | tr / tf | 260 | ps | 2 | ||
Relative Intensity Noise | RIN | -120 | dB/Hz | |||
Total Jitter Contribution | TX Δ TJ | 0.284 | UI | 3 | ||
Eye Mask for Optical Output | Compliant with IEEE802.3 z (class 1 laser safety) | |||||
Receiver Section: | ||||||
Optical Input Wavelength | λc | 1530 | 1550 | 1570 | nm | |
Receiver Overload | Pol | -3 | dBm | 4 | ||
RX Sensitivity | Sen | -24 | dBm | 4 | ||
RX_LOS Assert | LOS A | -40 | dBm | |||
RX_LOS De-assert | LOS D | -25 | dBm | |||
RX_LOS Hysteresis | LOS H | 0.5 | dB | |||
General Specifications: | ||||||
Data Rate | BR | 1.25 | Gb/s | |||
Bit Error Rate | BER | 10-12 | ||||
Max. Supported Link Length on 9/125μm SMF@1.25Gb/s | LMAX | 80 | km | |||
Total System Budget | LB | 22 | dB |