Shenzhen Miray Communication Technology Co., Ltd.
Miray makes your communication more efficient, fast and safe.
Add to Cart
Cisco SFP-10G-SR compatible SFP+ transceiver supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface card (NICs) etc. Featuring low power consumption, high speed, this 10G SFP+ transceiver is ideal for data center, enterprise wiring closet, service provider transport application, Radio & Baseband Unit, etc.
| Parameter | Symbol | Min | Typ | Max | Units | Ref. |
| Bit Rate | BR | 8.5 |
| 10.52 | Gb/s | 1 |
| Bit Error Ratio | BER |
|
| 10e-12 |
| 2 |
| Max. Supported Link Length | LMAX |
| 300 |
| m | 1 |
| Parameter | Symbol | Min | Typ | Max | Note | Unit |
| Transmitter | ||||||
| Nominal Wavelength | λ | 840 |
| 860 |
| nm |
| Optical Output Power | Pav | -6 |
| 0.5 |
| dBm |
| Extinction Ratio | ER | 3 |
|
|
| dB |
| Relative Intensity Noise | RIN |
|
| -128 |
| dB/Hz |
| Transmitter | ||||||
| Center Wavelength | λC | 840 |
| 860 |
| nm |
| Receiver Sensitivity@8.5Gb/s | RSENSE |
|
| -11.5 | 1 | dBm |
| Receiver Sensitivity@10.52Gb/s | RSENSE |
|
| -11 | 1 | dBm |
| Average Receiver Power | Pavg |
|
| 0.5 |
| dBm |
| LOS Assert | LOSA | -30 |
|
|
| dBm |
| LOS De-Assert LOS | LOSD |
|
| -12 |
| dBm |
| LOS Hysteresis |
| 0.5 |
|
|
| dB |
