Add to Cart
Miray SFP-GE-BX20-SM1310/1550 series SFPs are small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance
 preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
 The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. 
|  			 Parameter  |  			 			 Symbol  |  			 			 Minimum  |  			 			 Maximum  |  			 			 Units  |  		
|  			 Supply Voltage  |  			 			 Vcc  |  			 			 3.15  |  			 			 3.45  |  			 			 V  |  		
|  			 Ambient operating Temperature  |  			 			 Top  |  			 			 0  |  			 			 +70  |  			 			 °C  |  		
|  			 Operating Relative Humidity  |  			 			 –  |  			 			 5  |  			 			 95  |  			 			 %  |  		
Transmitter Specification
| Parameter | Symbol | Min | Typical | Max | Unit | |
| Data Input Swing Differential | VIN | 400 | 1800 | mV | ||
| common mode voltage tolerance | 15 | mV | ||||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |
| Transmit Disable Input | High | VD | 2.0 | Vcc | V | |
| Low | VEN | VEE | VEE +0.8 | V | ||
| Transmit Enable Output | High | VD | 2.0 | Vcc | V | |
| Low | VEN | VEE | VEE +0.8 | V | ||
| Parameter | Symbol | Min | Typical | Max | Unit | note | 
| Centre Wavelength | λc | 1270 | 1580 | nm | ||
| Receiver Sensitivity | Sen | -22 | dBm | 2 | ||
| Receiver Overload | Psat | -3 | dBm | 2 | ||
| LOS De-Assert | LOSD | -24 | dBm | |||
| LOS Assert | LOSA | -35 | dBm | |||
| LOS Hysteresis | 1 | 4 | dB | |||
| Receiver Reflectance | Rrx | -12 | dB | 







